I used carpeting tacks/staples which I nailed into the wood to secure the fabric tightly on the door panel. You can get them at Home Depot.
Stretch and staple one dimension of fabric at a time, ie. parallel sides.
The back of a finished door panel.
The front of a finished door panel. I also put a door handle on.
The last thing was installing the hinges. I did this over the fabric, making small holes in the fabric for the screw to pass through and into the wood. Pre-drill your screw holes.
The door was installed and is now ready to use! Go ahead and open it!
Romy welding on his new-to-us metal work bench.
The welding gas tank which we got a while ago from Sebastapol (see previous post).