Monday, July 21, 2008

We Made it to Berkeley!!

After a long long drive, we finally made to to Berkeley. The drive was really nice, at least the second half. We drove through Iowa, then exciting Nebraska, and then into Colorado. We passed over the Rockies on the second day, and drove into Utah. Utah near Moab was the first place we stopped and ventured off the highway. We got off of I-70 and drove along the Colorado River into Moab, where we had lunch on Friday. Then we barely made it out of Utah that day. We camped out in Fishlake National Forest, near the Nevada border. On Saturday, we headed into the long and lonely Nevada desert on Hwy 50. We expected Nevada to be really dry and dead, but it was surprisingly green and mountainous. Towards the end of the day, we made it to Reno, and then got back onto I-80 over the Sierra Navada's and into California. We camped out in Auburn, where we had our first shower since leaving Chicago!!!

Now we are in Berkeley, on campus. We got our UC Berkeley ID cards today, and hopefully we'll start looking at apartments soon!

Here are some pictures from the journey:

Packed Up Pick Up
The pick up truck is all packed up with our boxes and ready to go!

Goodbye Berwyn!
Saying goodbye to family. Left to right: Bill, Mom, Nicole, Jenn, Romy.

Filling Up in Colorado Rockies
Filling up at the gas station in the Rocky Mountains, Colorado.

Two Gold Prospectors
Two gold prospectors.

Camping Out
Setting up camp in Utah, in the Fishlake National Forest.

Bus in Tow
The bus in tow. Driving through the Nevada desert along Hwy 50.

Dust Devil
A dust devil swirling on Nevada salt flats.

Public Storage
Our HUGE Public Storage space. We moved in for only $1. We have room to store the Daewoo or the Bus inside along with all of our stuff.

The Golden Gate and San Fran
A foggy day over San Francisco and the Golden Gate Bridge!

More pictures are posted on our Flickr site: http://flickr.com/photos/jennromyphotos/

Thursday, June 12, 2008

Building the Trailer Day 1

Today we started building the trailer that will haul most of our things to California. We got the trailer from my dad's lot. It was a trailer from an old junky pop-up camper, which was stripped down to only the trailer/platform part. We ripped off all the material from the top of it to get just the metal frame and axle.

The Trailer Before Work


Some members in the frame were really rusty, so we had to cut them off. Also, the whole frame was covered in surface rust, we grinded it off so that we could work with it easier and weld it.

Cutting out a Rusty Member


Next we started constructing the frame. We scavenged some steel tubing from the lot as well. It was still good, so we cut it and welded it together to create a frame for the new trailer floor.

Welding

Welding the Front


. . . and thats how far we got today . . . .

Saturday, May 31, 2008

SAE Baja Competition 2008


The SAE 2008 Team! WOOT!
SAE Baja 2008

We are the red car in front, #47. Go Illusive Spotted Mountain Cow!
SAE Baja 2008

Saturday, May 10, 2008

We Graduated!

Wednesday, April 30, 2008

UIC Graduation Information


Yay! Graduation is finally here! Here are the dates:

Honors College Graduation Ceremony
Wednesday May 7th 2008
6:00pm - 8:00pm
UIC Forum (Halsted St. & Roosevelt Rd.)

Family Graduation Party
Friday May 9th 2008
6:00pm - ?
1304 S. Kenilworth Ave.

College of Engineering Graduation Ceremony
Saturday May 10th 2008
2:00pm - ?
UIC Pavilion (Harrison St. & Racine St.)

Monday, April 21, 2008

Almost done at UIC!

I know I haven't posted anything for a long time, but that is because we are very busy now that school is over. I will update the blog a little later with some more news.

Here are some funny pictures of me in my Bioe594 class at UIC. It is a class on microfluidics and microfluidic devices. We are making a micro-mixer, which is a device that takes two fluids and tried to mix them up together. The channels of our device are very small (about 30 micrometers) and fluids at such small scales don't mix together.

This is a picture of the people in our lab. We all look like big dorks! We are wearing white lab coats and hair nets because we have to do all of our work in the semi-clean room behind us (in the picture). No dust can get in our microfluidic devices, because the dust is almost as big as the channels that the fluids flow through!



This is me and my lab partner M.E. inside the semi-clean room. We are mixing some ingredients (which you can't see) in this picture. We look happy, but that day was a Friday, and we had to stay inside there until 7:15pm! That sucked! It was about 85F inside of the semi-clean room.


This is a picture of our device under a microscope. The channel is really long ( about 18mm) but this is just one tiny section of it (less than 1 mm).